Emerson

SolaHD Sola/Hevi-Duty

Power supply unit

SDN-C series

Single-channel AC/DC power supply unit (SMPS PSU) / converter
Cooling -- Convection
Status indicator -- NO contact relay (200mA; 50Vdc)
Status indicator -- Signal Active when Vout>18.5Vdc +/-5%

100Vac-240Vac (110Vac / 120Vac / 200Vac / 208Vac / 220Vac / 230Vac nom.; 43-67Hz)
85Vac-264Vac

120Vdc-340Vdc (200Vdc / 250Vdc nom.)
108Vdc-375Vdc

Input status LED
Output status LED
Alarm status LED

Single-phase (1AC) or DC

40A output (adjustable)

960W output

24Vdc output (adjustable)
23.5-28.5Vdc (24Vdc nom.)

screw connections

3...6mm2 / 13AWG...10AWG (screw connections; input)
10.6...13mm2 / 7AWG...6AWG (screw connections; input)

Short-circuit protection -- Output automatically goes to near zero / protected from continuous Short-circuit protection -- Auto-recovery
Peak Current Protection -- 1.5 x Nominal Current for > 4 seconds minimum while holding voltage > 20Vdc
Overcurrent protection -- PowerBoostTM
Overvoltage protection -- > 30.5Vdc but < 33Vdc; auto-recovery
Over-temperature protection -- LED Alarm and Output shutdown; auto-recovery
Back EMF Immunity -- < 35V No damage; auto-recovery
Parallel operation -- Active Parallel

No communication interface

DIN rail mounting
DIN rail TS35/7.5
DIN rail TS35/15

IP20

123 mm

180 mm

122 mm

metal housing

-40...+60 °C
(linear derating to 75% power) +60...+70 °C

-40...+85 °C

Commercialized

SDN-4024-100C

ATEX Directive (EN60079-0; EN60079-7; EN60079-15; II 3 G; Ex ec nC IIC Gc)
IECEx Certified IEC 60079-0; IEC 60079-7; IEC 60079-15 / Ex ec nC IIC Gc
Ex EAC TR CU 012/2011 Safety of Equipment intended for Explosive Atmospheres
CE marking (IEC/EN 60950-1 2nd edition)
cRUus UL recognized component (ITE - UL 60950-1/CSA C22.2 No. 60950-1 2nd Edition)
UL Recognized Component Class I Div 2; Class I Zone 2; T4
cRUus UL Recognized Component (Haz. Loc.; UL60079-0/CSA E60079-0; UL 60079-15 CSA / Class I; Zone 2; AEx nA nC IIC; Ex nA nC IIC)
cULus Listed (Ind. Control Equipment - UL 508; CSA C22.2 No. 107.1)
DNV-GL
ABS type approval
KC certified
IEC 60068-2-27 - Shock resistance - 11ms (10G); 3 axes
IEC 60068-2-6 - Vibration resistance - 10-2000Hz; 2.5G (random) for 20mins for each axis

Class I Zone 2

Extensive international hazardous location certifications; including Class I; Zone 2; ATEX; IECEx; ExEAC
Hazardous location temperature code (T-Code) rating of T4
International off-shore certifications; including ABS and DNV-GL
PowerBoostTM enables short duration overload capability to start loads with high inrush current
Three LEDs provide extensive diagnostics
Dual output terminals for convenience in wiring
DC OK relay to provide diagnostic information to a PLC; controller or monitoring system
Universal AC and DC input voltages to accommodate global requirements
Wide operating temperature range accommodates both extremely hot and extremely cold environments
Active Power factor correction on most models
Parallel operation capability standard
Supports redundant power supply operation using optional SDN Redundancy modules
5-year limited warranty

(input) 0.5 N.m
(output) 1.76 N.m

2

100mVpp max.

Altitude -- 0-6000m (0 to 20000ft) per MIL-STD-810F
Industrial automation
Process control
Material handling and conveyors
Hazardous locations
Marine applications

>550 000h (115Vac; at 25°C)
>570 000h (230Vac; at 25°C)
>360 000h (115Vac; at 40°C)
>370 000h (230Vac; at 40°C)